Pipe Construction:
Square Tube 30 x 2.5 mm or rectangular tube 60 x 30 x 2.5 mm
Height about 290 mm, 320 mm or 350 mm
Scaffolding up to 12 meters in length
Above that frame parts must be screwed together with a flange connection
Drive pulley:
Diameter 320 mm, spherical rotated and rubberized with mini diamonds,
8 mm thick including 60s wave, flange bearing and span sets
Tension drum:
Diameter 320 mm,
rotated spherical width 60s wave including flange bearing
Idler stations:
In the upper run: 2-piece, cleated 20 degrees
In the lower run: 1-piece, straight
Distance in the upper run: 750 mm
Distance in the bottom run: 2,000-3,000 mm
Distance in the task pane: 500 mm
Supporting roles:
Diameter 63.5/20/SW 15, with labyrinth seal, lybricated for life
Drive:
drum motor 220-240 V or 380-415 V 50 Hz IP 67
Belt:
Rubber belt EP 250/2, cover 3:1 normal quality,
Plain belt up to 18° angle
Up to 30 meter spacing endless wheel base
It's openly long for on-site continuous connection by the customer
Feeding chute:
1050 mm long with adjustable side rubber seal lip
Inner belt cleaner:
Diagonal wiper system BEKA
Outer belt cleaner:
Head wiper with continuous PU-rail, with spring tension
Emergency stop:
Emergency pull-wire according to EN 418 with rip cord according to accident prevention regulations
Protection systems:
Finger guards to drive drum and tension according to accident prevention regulations
Colouration:
Undercoat with zinc phosphate and painting with synthetic enamel
RAL 6011 Reseda green or other colors according to RAL table on request
Total dry film thickness of 120 microns |
